Using the Lenticular Option in Darkroom Booth
New Feature- Requires Booth 2025 3.01.1380 or higher
Video
Step by Step Instructions
- Click Edit Template
- Next to Print Commands, Click Edit
- Select the Lenticular Tab
- Enable lenticular printing and select the LPI (lines per inch) and orientation of the lines. 60 LPI works best.
- Set the Bleed. *Note - No bleed will typically work best when printing lenticular prints.
- You can print a test page to make sure everything is lining up.
7. In the Output menu, you will want to make sure the number of photos per session is set to 2 or 3
General Info and Recommendations
- When you add the lenticular print command Darkroom Booth will automatically interlace the captured image into a single print.
- Darkroom Software recommends using the lenticular option and a 60 LPI (lines per inch) lens as it will match the DPI(dots per inch) of most dye-sub and event style printers,
- The Lenticular option works best with two or three images per session.